Open Access Research Article

On Estimation Residual Stresses in Metals After Heat Treatment

Authors

  • Evgeny Leonidovich Pankratov * Nizhny Novgorod State Agrotechnical University, 97 Gagarin avenue, Nizhny Novgorod, 603950, Russia.

https://doi.org/10.22105/kmisj.v1i1.114

Abstract

Residual stresses developed during heat treatment have a significant effect on the mechanical performance, dimensional accuracy, and service life of metallic components. Therefore, the estimation of these stresses is an important issue in the design and optimization of heat treatment processes. In this paper, a mathematical model for estimating residual stresses in metals after heat treatment is proposed. The transient temperature distribution within the material is determined by solving the second Fourier heat conduction equation. Based on the obtained temperature field, an analytical approach is developed to evaluate the evolution of residual stresses during the heat treatment process. The proposed methodology provides a simple and efficient framework for estimating residual stresses and investigating the influence of thermal conditions on their development. The presented approach can be used as a basis for further studies on the optimization and control of heat treatment processes in metallic materials.

Keywords

Heat treatment of metals Residual stresses in metals Analytical approach for analysis
References (12)
  1. [1] Kamyshev, A. V, Nikitina, N. E., & Smirnov, V. A. (2010). Measurement of the residual stresses in the treads of railway wheels by the acoustoelasticity method. Russian journal of nondestructive testing, 46(3), 189–193. https://doi.org/10.1134/S106183091003006X

  2. [2] Totten, G. E. (2006). Steel heat treatment: Metallurgy and technologies. CRC Press. https://www.taylorfrancis.com/books/mono/10.1201/NOF0849384523/steel-heat-treatment-george-totten

  3. [3] Krauss, G. (2005). Steels: Processing, structure, and performance, Materials Park, OH: ASM International. https://doi.org/10.31399/asm.tb.spsp2.9781627082655

  4. [4] Ren, Q. Q., Baik, S. I., An, D., Isheim, D., Zhu, M., Krakauer, B. W., & Seidman, D. N. (2023). The effects of heat-treatment parameters on the mechanical properties and microstructures of a low-carbon dual-phase steel. Materials science and engineering: A, 888, 145801. https://doi.org/10.1016/j.msea.2023.145801

  5. [5] Kasay, P. O., Naumyk, V. V, Pedash, O. O., & Klochikhin, V. V. (2022). Low-cycle fatigue strength of heat-resistant alloy specimens produced by selective laser melting. Powder metallurgy and metal ceramics, 61(5), 259–268. https://doi.org/10.1007/s11106-022-00313-w

Article Metrics

How to Cite

Pankratov, E. L. (2026). On Estimation Residual Stresses in Metals After Heat Treatment. Karshi Multidisciplinary International Scientific Journal, 3(1), 62-70. https://doi.org/10.22105/kmisj.v1i1.114

Similar Articles

1-10 of 62

You may also start an advanced similarity search for this article.